SST-90绿光灯头
以下是从网站上复制下来的，竟然有个SST-90绿光的灯头。绿光的手电有什么特殊用途么PART 3 !!! P60 Style Custom Drop - in modules for SF and other Products. (part 2 can be found here)
Here I am offering P60 Style drop ins, they are available with Leds from the following manufacturers and some of the leds that will be offered are below.
SSC Seoul - P7 , P4
Cree - MC-E , XP-E, XRE , UV
Osram - Diamond Dragon , Golden Dragon Plus, GDP IR/
Luminus - SST -50, SST -90
Please refer only to part 3 for prices and current selections.
These modules will fit any flashlight that accepts a standard P60/D26 Style module.
Here are some pictures of a couple of modules
Here is one of the emitter in the base and converter board
http://i463.photobucket.com/albums/qq357/nailbender_cpf/emittersmall.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/Driversmalljpg.jpg
View of the module from the top and typical beam shot
http://i463.photobucket.com/albums/qq357/nailbender_cpf/Finishedtopsmall.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/Wallshotsmall.jpg
You can still see a bit of a doughnut hole in this picture but most of the time we can focus all or most of it out.
This is a picture of the new reflector made for the Cree XPE This gives a very smooth and concentrated hotspot.
http://i463.photobucket.com/albums/qq357/nailbender_cpf/XPEmodule-1.jpg
All of the modules end up being as close to standard length as possible The large die leds are much thicker and there is a small possibilty that there will be a crack at the head and body. I keep all as short as possible so if there is a crack there is probably nothing that can be done.
All hosts are slightly different and one module may fit tight in a SF product and a bit loose in a FM Nite clone or an FM C but they will fit all. One may have to have the spring cut down to allow the head to close more or a whole spring may be needed to keep the module from rattling.
Here are some of the modules that can be purchased with some of the configurations.
Most LED's are carried in Cool White, Neutral White, or Warm white. Please ask if available for your led.
Seoul P7 $65 - 3.6v - 6volts /1- 3 or 5 levels /Cool or warm tint
Seoul P4 $ 30 - 3 - 6 volts (14V?) 3 or 5 levels/ Neutral White
Cree XRE - XPE $30 - 3 - 6 volts 3 or 5 levels / 3.6 -8.4V 3&5 levels / R2 available in both / neutral (Q4 5B) and warm tints
Cree MCE $ 75 - 3.6 - 6 volts/ 1 - 3 or 5 levels / Cool - Neutral - Warm bins
Cree UV XL 7090 $45 (395nm) 3v-6volts /1 level
Osram Diamond Dragon $40 - 3 -6 volts / 1 level / Ultra White and WARM WHITE/True Green / Red
Osram Golden Dragon Plus $40 -3 - 6 volts -/ 3.6 - 8.4v /3 or 5 level/ Ultra White, White, Warm White tints
Osram Golden Dragon IR $40 (850 & 940nm)-3v- 6 volts /1 level
Luminus SST-50 - 3.6 -6volts /1 - 3 or 5 levels / Cool White (PM for Quote)
Luminus SST -90 - 3.6 -6 volts /1 - 3 or 5 Levels / Cool White - Green - Red(PM for Quote)
K2 TFFC - $40 - 3V- 6 volts / 1 level / Cool White - warm white
Rebel - $30 -3v-6volts /3 and 5 levels /cool white , neutral white
Nichia UV 365nm (PM for Quote)
I try to buy and test the newest bins as they come out such as R2 flux bin WD tint in both XPE and long throwing XRE or the new Luminus products
I have Neutral whites for most of the leds I stock including Q4 5B in XRE and Q3 4C , 5B in XPE. I also have neutral whites in MCE with Kbin 4C & 5B. Don't forget UBin P4's
I also have a wide variety of Warm whites in stock from most manufacturers.
If you have 3P one cell lights that are your favorites I have great long running lights with buck boost converters that will give some of the longest run times you will find in lights like XRE, XPE, GDP.
Just remember if you don't see it or don't understand something just write and Iwill see if can help.
Please specify what host and batts you are using when inquiring about a module or led. There are many driver configurations and the change regularly as demand changes.
When ordering please post your order in the thread plus put details of order in PayPal notes. Also please list CPF Nickname in paypal notes. paypal has been bad lately about not sending shipping addresses please make sure it is listed in paypal or in paypal notes.
MY Paypal info in biography or PM for.
I will be posting beam shots below in the next couple of days all in one place now that we have started another part.
D36 for M STYLE lights are (HERE)
While these are not new modules I thought it a good place to show these heads.
These are some Chinese cloned Lamp Holders they fit all C & P Surefire models and most clones I would imagine. I bought some to fill some FM C hosts & FM Nite hosts I had that needed heads, I bought a couple of each while I was getting some.
The quality is quite good I thought. There may be a speck of anno missing where the aggressive flutes and ribs are but very little as you can see by the pictures.
The ribs and flutes should help cool the heads some.
Any bezels you have for your C or P surefire or clones will fit these just like they do any SF product.
Here are pictures, hopefully most detail can be seen since they are black it is harder to show.
Left side I call bottom ribbed and hex shape. Right side is bottom ribbed & fluted
http://i463.photobucket.com/albums/qq357/nailbender_cpf/bottomfinHexnoflute.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/bottomfluteFin.jpg
Left side I call top ribbed & fluted is my favorite although may be to aggressive for some. Right side is top view as top is same on all
http://i463.photobucket.com/albums/qq357/nailbender_cpf/topfluteandrib.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/topshot.jpg
Here they are on a FM C style host and a 18650 FM Nite host
http://i463.photobucket.com/albums/qq357/nailbender_cpf/onhosts2.jpg
SST-50 on left and SST -90 on the right
http://i463.photobucket.com/albums/qq357/nailbender_cpf/SST-50.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/sstbeam.jpg
Warm MCE on Left & Mbin Cool White on Right.
http://i463.photobucket.com/albums/qq357/nailbender_cpf/warmwhitebeamshot.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/CoolWhite.jpg
XPE Beam shot / XPE R2 VS Diamond Dragon
http://i463.photobucket.com/albums/qq357/nailbender_cpf/xpebeamshot.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/R2XPEonleftDDonright-1.jpg
XRE R2 VS K2 TFFC Warm / P7 VS XPE R2
http://i463.photobucket.com/albums/qq357/nailbender_cpf/R2K2TFFCsmall-1.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/P7R2-D01binXRE.jpg
P7 beam shot / MCE warm
http://i463.photobucket.com/albums/qq357/nailbender_cpf/P7Hotspot.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/WarmMop.jpg
Red Diamond Dragon on left / Green Diamond Dragon on right
http://i463.photobucket.com/albums/qq357/nailbender_cpf/Red.jpghttp://i463.photobucket.com/albums/qq357/nailbender_cpf/Green.jpg
Green SST 90
http://i463.photobucket.com/albums/qq357/nailbender_cpf/greensst90.jpg
红绿灯用？ 可玩性很高 泡妞用的 好多图 这个强啊！ 好好看看哦 调完焦就是根巨大的激光{:1_246:} 打算放假后自己搞个光杯玩儿 往戴着帽子的人的头上照........一顶绿帽出现了{:1_268:} 往戴着帽子的人的头上照........一顶绿帽出现了{:1_268:}
289484769 发表于 2009-10-2 21:53 http://www.shoudian.org/images/common/back.gif
呵呵！ SST-90绿光的光斑真是漂亮！！ SST-90绿光的光斑真是漂亮！！ 绿帽出现了 绿光的不错！ 特殊用途喽{:1_243:}
页:
[1]