NITECORE D11 coming soon...
NITECORE D11 coming soon... Nitecore D11 XP-G R5The new Nitecore D11 utilises the smart piston drive switching system, as found in the D10 and EX10 models, effectively doing away with the common tail switch.
Utilising a Cree XP-G R5 LED with a maximum output of 145 lumens, the D11 has a variable brightness system allowing the user to select any level between 3 and 145 lumens. Additional strobe and SOS settings are easily selectable.
Waterproof to IPX-8 and impact resistant according to US MIL-STD-810F making the D11 the ultimate every day carry flashlight.
Due in stock mid August
Nitecore D11 Specifications:
[*]Unique electronic-controlled Smart-PD switch, proven to be very reliable;[*]Infinitely Variable Digital-controlled Brightness System[*]Intuitive and simple user interface[*]Defensive Strobe and emergency SOS functionality[*]Made from military grade aluminum alloy, extremely strong[*]Compact size and light weight, suitable for EDC (every day carry)[*]Mil-Spec Type III Hard Anodized finish[*]Resistant to impact by dropping according to US MIL-STD-810F[*]Waterproof to IPX-8 standard[*]Broad-voltage fully-regulated circuit, compatible with one AA battery or other cells of the same size[*]Premium high efficiency CREE XP-G R5 LED[*]Max output 145 lumens[*]Metal reflector[*]Ultra clear impact-resistant optical lens[*]Ability to tail stand for use as a candle light. Output & Runtime Maximum output 145 lumens, for about 1.5 hours Minimum output 3 lumens, for about 100 hours[*]Length: 89mm[*]Diameter: 19mm[*]Weight: 46g( without battery )[*]Accessories: Lanyard, holster, spare o-ring
D11 User Guide:
Light Activation
Insert battery and screw the body back on fully, the light is now ON. Click the tail cap once and the light turns OFF. Click the tail cap another time to ON the light again.
Selecting Desired Brightness
When the light is ON, depress the tail cap and hold for more than 0.5 seconds, the brightness level will ramp from Max to Min or Min to Max depending on starting level; If the tail cap is released, and then depress-and-hold again, the light performs brightness ramping in the reverse direction. When the desired brightness level is reached, release the button to stop brightness ramping and the user defined brightness level in now memorized. When adjusting the brightness level the light will flash twice to alert the user maximum or minimum level has been reached.
SOS and Strobe Mode
When the light is on, quick double-click the switch - the light enters SOS directly
When the light is on, quick double-click the switch and hold - the light enters Strobe mode.
When the light enters SOS or Strobe mode, user only need to click off the light and then click on, the light will revert to memorized user-defined mode.
Momentary On Mode
Loosen the light bezel about one turn, and the light enters momentary on mode. Under this mode, depress the tail cap for ON and release to turn the light OFF.
Safety Lock-out
Safety Lock-out function can be used to avoid accidental activation. When the light is off, depress the tail cap and hold for more than 1 second, the light will flash to alert that it has entered safety lock-out mode. Then the light will not turn on due to accidental activation. Under safety lock-out mode, quick triple-click the tail cap or remove and load the batteryto deactivate lockout feature. 比较简单，就不翻译了 这个翻译无敌 本帖最后由 emw 于 2010-7-29 08:14 编辑
google 翻译的要好一点:
Nitecore D11座XP的Ğ R5的
新Nitecore D11中使用了智能开关活塞驱动系统，在D10和EX10机型，有效地做好与共同尾部开关了。
通过一个已经克里XP的Ğ R5的一个最大输出功率为145流明的LED，在D11中有一个可变亮度系统使用户可以选择任何3至145流明的水平。附加闪光灯和SOS设置很容易选择。
防水能力：IPX - 8和耐冲击性根据美国的MIL - STD - 810F标准，最终使D11中每天携带手电筒。
由于8月中旬的股票
Nitecore D11座规格：
独特的电子控制的智能局部放电开关，被证明是非常可靠;
无级变速数控系统的亮度
直观和简单的用户界面
防御和紧急求救功能频闪
从制造军用级铝合金，非常强烈
结构紧凑，重量轻，适合为东区区议会（每天进行）
米尔- III型硬质阳极氧化规格完成
耐冲击的下降根据美国的MIL - STD - 810F标准
防水能力：IPX - 8标准
广泛的电压完全调节电路，与一节AA电池或同样大小的其他细胞相容
保费高效率CREE的XP的Ğ R5的发光二极管
最大输出145流明
金属反射镜
超清晰的耐冲击光学镜头
尾站的能力，作为一个烛光使用。输出与运转最大输出145流明，约1.5小时最低输出3流明，约100小时
长度：89毫米
直径：19毫米
重量：四十六克（不含电池）
附件：挂绳，皮套，备用O型圈
D11中使用指南：
光活化
插入电池和螺钉的身体回到充分，灯光已经亮起。按一下尾盖一次，指示灯熄灭。按一下尾巴帽其他时间就光了。
选择想要的亮度
当灯亮，降低尾帽，持有超过0.5秒，亮度水平从最高到最低坡道或最小到最大程度取决于开始;若尾盖被释放，然后降低并持有再次，光亮度表现在相反方向斜坡。当达到理想的亮度水平，释放按钮，停止斜坡和亮度定义现在记忆亮度水平的用户。当调整亮度灯将闪烁两次，以提醒用户的最高或最低水平已经达到。
SOS和频闪模式
当灯亮，快速双击开关 - 光直接进入SOS救援中心
当灯亮，快速双击并按住开关 - 光频闪进入模式。
当光线进入SOS救援中心或闪光灯模式，用户只需要点击过轻，然后按一下，光背会恢复到用户自定义模式。
瞬时模态
松开挡板约1转向灯，光进入短暂的模式。根据这一模式，降低了对尾帽和释放关灯。
安全锁定
安全锁定功能，可用于避免意外引爆。当灯关闭，降低尾帽，持有超过1秒，指示灯闪烁提醒，它已经进入安全锁定模式。然后轻，不会因意外打开激活。根据安全锁定模式，快速三重单击尾巴帽或删除并加载电池停用锁定功能。 这个不错，nc还在坚持 NDI + D10 = D11 NOKIA，科技以换壳为本。 觉得没有d10好看？ 又是橘皮 , 看来NC做不出光面杯 ~ {:1_250:} 本帖最后由 陆压道君 于 2010-7-29 09:27 编辑
换LED+外观小改 头部看上去和D10一模一样
这张的头部怎么又变成花纹不一样了？确定这两张是同一个筒？
应该是角度不同而已，我觉得D11更好看
原来想收个二手D10，现在看来还是等等D11吧
看NC这认真态度，搞不好D11把待机电流解决了就无敌了，好像效率也有所提升 尾部这样做，倒立应该不够稳，就像fenix的，有些不平就容易倒 不错不错 顶一下 各人口味不同，我觉得比D10好看
不过我是不会再用PD开关了，虽然经过折腾能达到比较好的效果，但经常要折腾
侧面开关，电子开关更轻松，而且电子开关可靠性无敌 ...
dracodoc 发表于 2010-7-29 09:18 http://www.shoudian.org/images/common/back.gif
我同意兄弟的意见,现在我的D10经常误动作,而且是否用了不同硅油,开关手感不好,很用力 关注一下