<P>“GatLight” 电筒 </P>
<P>出品公司:LumenCraft Inc.</P>
<P>瑞士设计,美国制造,内部包含30多个元件,不锈钢的售价在2000rmb左右,钛合金的在4000左右</P>
<P>现在已经是V2版本了~带无级调光功能,拥有两路温控开关保证LED不会因过热而损害~</P>
<P></P>
<P></P>
<P></P>
<P></P>
<P>Below are some photos, taken fron our most recent production run:</P>
<P>GatLight Front Frames being screwed together</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7333.jpg"></P><br><br><br><br>
<P>Vacuum Chamber to degas the silicone for the silicone seals.</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7377.jpg"></P><br><br><br>
<P>Once the Silicone is degased, it gets injected into molds which are then place inside of an oven</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7367.jpg"></P><br><br><br>
<P>After spending a half hour in a high temperature oven, the molds are disassembled and the silicone seals are removed.</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7358.jpg"></P>
<P>The electronics is carefully assembled under a microscope</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7374.jpg"></P><br><br><br>
<P>After each step is completed the electronics gets tested repeatedly to guarantee optimum performance and zero error tolerance for delivered GatLights.</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7364.jpg"></P><br><br><br>
<P>Once the electronics component is fully assembled, 2 rounds of space grade heat sinking epoxy are applied to pot the electronics into an indestructable component. Each round requires several rounds in an oven for curing. </P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7345.jpg"></P>
<P>Once both rounds of epoxy have cured, the excess is filed off, to produce the final electronic driver sandwich components.</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7384.jpg"></P>
<P>Each driver sandwich consists of over 35 electrical components to provide the superior temperature monitoring and brightness & current regulation features of this light.</P>
<P><IMG src="http://www.gatlight.com/res/ProductionV2/imgp7385.jpg"></P><br><br><br>
<P>Each GatLight consists of over 80 parts and more then 100 manual assembly tasks to create one of the most unique and highest performing pocket flashlights available today.</P><br><br><br>
<P>Photo shows Titanium, Aluminum, Stainless Steel GatLight V2s (from left to right)</P>
<P><IMG src="http://www.gatlight.com/res/GatLightV2/11tri.jpg"></P>
<P>无级调光的视频:http://gatlight.com/res/default/brightnesslevels.swf</P>[em06]
[此贴子已经被作者于2006-7-1 13:22:08编辑过]
|